| Item | Value |
|---|---|
| CAS / formula | 151-21-3 / C12H25NaO4S |
| Molar mass | 288.38 g/mol |
| Krafft point (illustrative) | about 16 C |
| Grades (illustrative) | 92-95% powder, 30% solution |
| Packing / MOQ | 25 kg bags or drums / 1 tonne |
The full substance data sheet ships with the lot COA, so request the COA/MSDS or request a sample from contact our team.
Short answer: CAS 151-21-3 is sodium lauryl sulfate, the sodium salt of a linear C12 alkyl sulfate ester. Formula C12H25NaO4S, molar mass 288.38 g/mol. It is an anionic surfactant used for foam, wetting and emulsification, sold as 92-95% needle powder and 30% aqueous solution. ORID Chem supplies both forms with TDS, lot COA and MSDS.
Key takeaways
- 151-21-3 is C12H25NaO4S, 288.38 g/mol, a linear C12 sulfate ester sodium salt.
- Literature CMC is about 8.2 mM at 25 C and the Krafft point about 16 C.
- Powder grades run 92-95% active; the 30% solution ships mostly water.
- Cold water below the Krafft point leaves undissolved needles.
- AOS, SLES and LDS have separate CAS numbers and different formulation behaviour.
Substance data at a glance
The values below describe the molecule and its typical commercial forms. Registry data is fixed; grade figures are illustrative and must be confirmed on the lot COA.
| Field | Value | Source |
|---|---|---|
| CAS registry number | 151-21-3 | Registry |
| Preferred name | Sodium lauryl sulfate | Registry |
| Common synonym | Sodium dodecyl sulfate (SDS) | Laboratory usage |
| Molecular formula | C12H25NaO4S | Registry |
| Molar mass | 288.38 g/mol | Calculated |
| CMC at 25 C | about 8.2 mM | Literature value |
| Krafft point | about 16 C | Literature value |
| Commercial assay | 92-95% powder, 30% liquid | Illustrative grade range |
Molecular structure and what the head group does
A linear twelve-carbon chain attaches through an oxygen to a sulfate group balanced by sodium. The chain is hydrophobic, the sulfate head is hydrophilic, and that split is why the molecule collects at an interface. The image above shows the CH3(CH2)11OSO3Na arrangement. Ethoxylation or a change of counterion produces a different substance with a different registry number.
Behaviour in water at formulation temperatures
Above its Krafft point the salt dissolves readily; below it, solubility drops sharply and a cold plant sees undissolved needles. Micelles start forming near the critical micelle concentration, and surface tension falls until that point is reached. Our CMC and Krafft point note covers both numbers with a worked formulation example. Liquid SLS 30% solution avoids the dissolution step but needs winter storage planning.
Commercial grades and where each is used
Toothpaste and powder detergent plants favour needle grades for low moisture and high active. Liquid detergent lines take the 30% solution. Reagent buyers ask for SDS 99%. Packing is illustrative at 25 kg bags or drums with a one-tonne MOQ. See SLS 92%, SLS 93%, SLS 94% and SLS powder for the individual grade pages.
How this CAS compares with other anionics
Sulfonates and ethoxylated sulfates behave differently in hard water and in salt-thickened systems. AOS keeps detergency better as calcium rises; SLES 70% gives a denser foam and different viscosity response; LDS is chosen for low-temperature electrophoresis. Our AOS versus SLES comparison and wetting time data show the practical differences.
Ordering information and documentation
Send the grade, target assay, monthly volume and destination port. We reply with current packing, lead time, MOQ and the document set: TDS, lot COA and MSDS. Buyers in India, Pakistan, Iran, Russia and Southeast Asia usually request the documents before booking the vessel. Contact our team for a sample to run against your incoming QC method.
Frequently asked questions
What is the molecular formula for CAS 151-21-3?
C12H25NaO4S, with a molar mass of about 288.38 g/mol. It is the sodium salt of the monoester of lauryl alcohol and sulfuric acid.
Is CAS 151-21-3 a sulfate or a sulfonate?
A sulfate ester. The carbon chain is bonded to the sulfate group through oxygen. Sulfonates such as AOS have a direct carbon-sulfur bond and carry a different CAS number.
What is the critical micelle concentration?
A literature value near 8.2 mM at 25 C is commonly cited for sodium dodecyl sulfate. Treat it as a literature figure, not a lot specification.
Why does powder fail to dissolve in a cold plant?
Below the Krafft point the solubility of the salt falls sharply. Warm the water or use the 30% solution, then check the storage temperature of the tank.
Which grade should a shampoo formulator sample first?
Many start with SLS 94% for foam, then blend with SLES 70% for mildness and viscosity. Run your own salt curve before fixing the ratio.
Request a quote or a sample
Request a quote with the grade, assay and destination port for current bulk pricing, MOQ and lead time. Request a sample to check dissolution in your plant water, and request the COA/MSDS for the documentation set.
Written and reviewed by the ORID Chem technical team. Last updated: 16 November 2026. Figures marked illustrative are working values, not quotations. Confirm current specifications on the product TDS and lot COA before ordering.




