| Item | Value |
|---|---|
| Molecular formula | C12H25NaO4S / CH3(CH2)11OSO3Na |
| Molar mass | 288.38 g/mol |
| CAS | 151-21-3 |
| Assay grades (illustrative) | 92-99% powder, 30% solution |
| Documents | TDS, lot COA and MSDS on request |
For bulk pricing and MOQ on C12H25NaO4S grades, request a quote or request the COA/MSDS from contact our team.
Short answer: The formula is C12H25NaO4S, more descriptively CH3(CH2)11OSO3Na, with a molar mass of 288.38 g/mol. It describes one linear dodecyl chain joined through an oxygen atom to a sulfate group balanced by a sodium ion. ORID Chem supplies this substance under CAS 151-21-3 in powder and solution grades.
Key takeaways
- C12H25NaO4S and CH3(CH2)11OSO3Na describe the same molecule under CAS 151-21-3.
- Molar mass 288.38 g/mol follows from the formula and does not change with grade.
- Assay on a lot COA is a weight percentage, not part of the molecular formula.
- Ethoxylation, sulfonate head groups and lithium counterions produce different formulas.
- Put the formula beside the CAS number on the PO and the incoming QC method.
What is the molecular formula of sodium dodecyl sulfate?
C12H25NaO4S is the condensed formula quoted on most specification sheets. Count twelve carbon atoms, twenty-five hydrogens, one sodium, four oxygens and one sulfur. The same molecule appears as CH3(CH2)11OSO3Na when the sheet wants to show which atoms sit where. Both strings describe one substance, registered as CAS 151-21-3, and neither tells you the assay of the drum in front of you.
Why two formulas appear on one TDS
The condensed form is compact and suits databases. The semi-structural form makes the ester linkage visible, which matters when a formulator is checking whether a supplier is quoting a sulfate ester or a sulfonate. Ask for both on the TDS.
Adding up the molar mass from atomic weights
Molar mass comes from the formula, not from the grade. Using standard atomic weights, C contributes 12 x 12.011, H contributes 25 x 1.008, Na contributes 22.990, O contributes 4 x 15.999 and S contributes 32.06. The total is 288.38 g/mol. Buyers use this number when they convert a molar dose in a laboratory buffer into grams of product.
| Element | Atoms in formula | Atomic weight (g/mol) | Contribution (g/mol) |
|---|---|---|---|
| Carbon | 12 | 12.011 | 144.13 |
| Hydrogen | 25 | 1.008 | 25.20 |
| Sodium | 1 | 22.990 | 22.99 |
| Oxygen | 4 | 15.999 | 64.00 |
| Sulfur | 1 | 32.060 | 32.06 |
| Total | 43 | – | 288.38 |
How the formula differs from the assay on a COA
A lot COA reports active matter as a percentage of product weight. A 92% powder contains roughly 92 g of C12H25NaO4S per 100 g; the balance is water, sodium sulfate, unsulfated alcohol and other process residues. The formula stays C12H25NaO4S at 92% and at 99%. Confusing the two leads to a dosing error of about 8% when a formula is written on a molar basis.
Our SDS 99% and SDS 97% listings sit at the higher end of that range. For detergent plants the SLS 92 grade is usually the starting sample. Divide the required active mass by the assay fraction to get the weigh-out, and confirm the assay method with your QC lab.
Formula comparison with neighbouring anionic surfactants
Formula is the quickest way to separate products that sound alike. Ethoxylation adds C2H4O units, a sulfonate drops one oxygen from the head group, and a lithium counterion replaces sodium. Each change moves the molar mass and the dose calculation.
| Product | Formula or repeat unit | CAS | Molar mass (g/mol) |
|---|---|---|---|
| Sodium dodecyl sulfate | C12H25NaO4S | 151-21-3 | 288.38 |
| Sodium lauryl ether sulfate | C12H25(CH2CH2O)nNaO4S | 68585-34-2 | Varies with n |
| Lithium dodecyl sulfate | C12H25LiO4S | 2044-56-6 | 272.33 |
| Sodium C14-16 olefin sulfonate | R-SO3Na, C14-16 | 68439-57-6 | Varies with chain |
Where to put the formula in purchase documents
Print C12H25NaO4S next to the CAS number on the purchase order and the incoming QC method sheet. A trade name alone leaves room for an ethoxylated sulfate to be shipped in its place. Our note on anionic active matter titration explains why the assay figure needs a named method before it can be compared between two suppliers.
Checking a supplier formula against your own calculation
Three steps settle a mismatch. Confirm the counterion is sodium rather than lithium or ammonium. Confirm the head group is a sulfate ester with four oxygens, not a sulfonate with three. Then recompute the molar mass and compare it with the value on the TDS. SLS and SDS are two names for the same formula, so a quote that switches between them is not a formula change.
Our liquid versus powder freight comparison covers the application side.
Frequently asked questions
Is C12H25NaO4S the same as C12H25SO4Na?
Yes. Both are condensed ways of writing the sodium salt of dodecyl hydrogen sulfate. The atom count is identical; only the grouping of the sulfate oxygens differs.
Does the formula change between SDS powder and SDS solution?
No. Water added to make a 30% solution is a separate component. The dissolved surfactant still has formula C12H25NaO4S, and the molar mass stays 288.38 g/mol.
Why do some sheets quote 288.4 g/mol instead of 288.38?
Rounding of the atomic weights and of the final sum. Both values are consistent with the same formula. Use the precision your analytical method requires.
Can the formula tell me whether a sample is SLS or SLES?
It can. SLES carries ethylene oxide repeat units and its formula includes an n multiplier. If the TDS shows C12H25NaO4S without those units, the product is the non-ethoxylated sulfate.
Which grade should I sample for a molar-dose buffer?
Start from a high-assay reagent grade such as SDS 99% so the weigh-out is close to the theoretical mass. Confirm the lot assay before making up a standard solution.
Request a quote or a sample
For bulk pricing, MOQ and lead time on C12H25NaO4S grades, request a quote with your target assay and destination port. Request a sample for method validation and request the COA/MSDS before the first shipment.
Written and reviewed by the ORID Chem technical team. Last updated: 20 November 2026. Figures marked illustrative are working values, not quotations. Confirm current specifications on the product TDS and lot COA before ordering.



