| Item | Value |
|---|---|
| CAS registry number | 151-21-3 |
| Formula / molar mass | C12H25NaO4S / 288.38 g/mol |
| Commercial grades | 92-95% powder, 30% solution (illustrative) |
| Packing / MOQ | 25 kg bags or drums / 1 tonne (illustrative) |
| Documents with each lot | COA, TDS and MSDS on request |
For bulk pricing and MOQ on CAS 151-21-3 powder, request a quote or request the COA/MSDS from contact our team.
Short answer: CAS No 151-21-3 is the registry entry for sodium lauryl sulfate, also sold as sodium dodecyl sulfate or SDS. Both names describe one anionic surfactant, C12H25NaO4S, molar mass 288.38 g/mol. ORID Chem supplies it as 92-95% powder and 30% solution. The number belongs on the COA, TDS and MSDS.
Key takeaways
- 151-21-3 identifies the C12 sodium alkyl sulfate molecule, not a purity grade.
- SLS, SDS and lauryl sodium sulfate are synonyms for the same registry entry.
- Powder grades run 92-95% active; the 30% solution ships mostly water.
- Ask for active matter, pH and unsulfated matter on the lot COA, instead of a trade name.
- AOS, SLES and LDS carry different CAS numbers and different formulation behaviour.
What CAS No 151-21-3 actually registers
A CAS registry number identifies a substance, not a commercial grade. 151-21-3 covers the pure alkyl sulfate salt with a linear C12 chain, regardless of whether a supplier calls it SLS, SDS or sodium dodecyl sulfate. Assaying 92% or 99% does not change the number. Buyers who treat the CAS number as a grade code end up comparing a powder quote against a solution quote and miss the water freight. We ship both forms: SLS 92% powder and SLS 30% solution.
Names that all resolve to the same substance
Sourcing teams meet four or five names for one molecule. Purchase orders from India and Pakistan usually say sodium lauryl sulfate; laboratory catalogues prefer sodium dodecyl sulfate; a French specification may read dodecyl sulfate de sodium. All of them point to 151-21-3.
| Name seen on documents | Language or channel | Registry number |
|---|---|---|
| Sodium lauryl sulfate (SLS) | Detergent and personal care purchasing | 151-21-3 |
| Sodium dodecyl sulfate (SDS) | Laboratory and electrophoresis catalogues | 151-21-3 |
| Dodecyl sulfate sodium salt | Reagent specifications | 151-21-3 |
| Lauryl sodium sulfate | Older formulation sheets | 151-21-3 |
| Lithium dodecyl sulfate (LDS) | A different salt, not this substance | 2044-56-6 |
Grade specifications listed under one registry number
One CAS number covers a spread of active matter. The figures below are illustrative working ranges taken from our catalogue; the binding values sit on the lot COA. Needle powder is dusty and needs a bag filter at the feed hopper. Liquid grades remove the dissolving step but add roughly three tonnes of water per tonne of active.
| Grade | Active matter | Form | Typical use |
|---|---|---|---|
| SLS 93% | 93% min | White needles | Laundry powder, toothpaste |
| SLS 94% | 94% min | White needles | Shampoo and shower gel |
| SLS 92 grade | 92% min | White needles | Industrial detergent |
| SDS 99% | 99% min | Fine powder | Electrophoresis and reagent use |
| SLS 30% liquid | 30% min | Clear liquid | Liquid detergent blending |
Where the CAS number belongs in purchase documents
Put 151-21-3 on the purchase order, the proforma invoice, the packing list and the label artwork. A quote that lists only a trade name leaves room for a different chain-length sulfate to arrive. Ask for the TDS and a lot COA showing active matter, pH of a 1% solution, unsulfated matter and sodium sulfate. Our guide to reading anionic active matter on a COA explains the titration methods behind that line item.
Checking a supplier quote against the registry number
Three questions settle most mismatches. Does the quoted grade carry 151-21-3 on its TDS? Is the active matter measured by the same titration method as your incoming QC? What is the packed form and the net weight per bag or drum? Illustrative commercial terms for bulk orders are 25 kg bags or drums and a one-tonne MOQ; confirm current terms before scheduling production. SLS powder and SLS for sale pages show the current packing options.
How 151-21-3 differs from neighbouring sulfonates
The sulfate head group is the distinguishing feature. Alpha olefin sulfonate carries a sulfonate group on a C14-16 chain and keeps foaming in hard water; lauryl ether sulfate is ethoxylated before sulfation, which changes mildness and salt response. Lithium dodecyl sulfate swaps the sodium counterion for lithium and behaves differently at low temperature. Our AOS versus SLES comparison covers the formulation side of that choice.
| Product | CAS | Head group | Where it is usually chosen |
|---|---|---|---|
| SLS / SDS | 151-21-3 | Sulfate ester | Foam, wetting, lab use |
| AOS | 68439-57-6 | Sulfonate | Hard-water detergency |
| SLES | 68585-34-2 | Ethoxylated sulfate | Shampoo, dishwash liquid |
| LDS | 2044-56-6 | Sulfate ester, lithium salt | Cold-water electrophoresis |
Frequently asked questions
Does a higher assay change the CAS number of SLS?
No. 92% powder and 99% reagent grade share 151-21-3 because the substance is the same. Purity belongs on the specification sheet, not in the registry identifier.
Why do some quotes list SDS as the product and others list SLS?
Both are conventional names for sodium dodecyl sulfate. Personal care buyers tend to use SLS, laboratory buyers SDS. Check that the CAS number and molecular formula match before comparing prices.
Should the CAS number appear on the drum label?
Import paperwork and safety documentation normally carry it. Label requirements vary by destination, so agree the artwork with your consignee and keep the number on the packing list in any case.
Is CAS 151-21-3 the same as sodium laureth sulfate?
No. Sodium laureth sulfate, or SLES, is ethoxylated and carries CAS 68585-34-2. The extra ethylene oxide units change mildness, viscosity response and active matter per kilogram.
Which grade should a detergent plant order first?
Start from the target active dose. Powder plants usually sample SLS 92%; liquid blending lines often start with SLS 30% solution to skip dissolution. Both are illustrative starting points.
Request a quote or a sample
For bulk pricing, MOQ and lead time on CAS 151-21-3 grades, request a quote with your destination port and monthly volume. Request a sample before locking the formula, and request the COA/MSDS to check active matter and pH against your incoming QC method.
Written and reviewed by the ORID Chem technical team. Last updated: 16 November 2026. Figures marked illustrative are working values, not quotations. Confirm current specifications on the product TDS and lot COA before ordering.




