| Item | Value |
|---|---|
| Enquiry should state | CAS, assay, form, volume, port |
| Illustrative packing | 25 kg kraft bags or fibre drums |
| Illustrative MOQ | 1 tonne |
| Documents per shipment | TDS, lot COA, MSDS |
| Sample | From the grade you intend to order |
Ready to buy? Request a quote with your grade, monthly volume and destination port, and request a sample first.
Short answer: To buy sodium dodecyl sulfate, send the grade or target assay, the monthly volume, the destination port and the documents your QC team needs. ORID Chem quotes CAS 151-21-3 in 92-99% powder and a 30% solution. Illustrative terms are 25 kg bags or fibre drums and a one-tonne MOQ, with a sample, TDS, lot COA and MSDS.
Key takeaways
- A usable enquiry states CAS, assay, form, volume, port and QC methods.
- Compare cost per kilogram of active matter, not per kilogram of product.
- Validate a sample and its lot COA before committing to a container.
- Illustrative terms are 25 kg bags or drums and a one-tonne MOQ.
- Freight on water can reverse the apparent saving of a 30% solution.
What to put in a first purchase enquiry
Five items make a quote comparable: substance and CAS, target active matter, physical form, monthly tonnage, and destination port. Add the analytical methods your incoming QC uses, since an assay figure without a method is hard to check. If a particular impurity limit matters, state it up front. Enquiries that list only a product name and a price target usually take two extra rounds to settle.
Choosing a grade before comparing prices
Price per kilogram of product is not price per kilogram of active surfactant. A 30% solution looks cheaper until freight on the water is counted. A 99% reagent powder costs more per kilogram but may be the only grade that passes an analytical specification. Pick the job first, then the grade.
| Buyer situation | Grade to sample | Reason |
|---|---|---|
| Laundry powder plant | SLS 92% | Foam at a workable cost |
| Toothpaste or shampoo | SLS 94% | Lower salt and tighter colour window |
| Liquid detergent line | SLS 30% solution | No dissolving step |
| Electrophoresis lab | SDS 99% | Tight impurity limits |
| General analytical use | SDS 97% | Higher assay, moderate cost |
Sample, COA and method validation
Ask for a sample from the grade you intend to order, not a generic laboratory sample. Run your own assay, pH and unsulfated matter checks against the supplied COA before committing to a full container. If your titration method differs from the supplier’s, agree the method and the acceptance window early. Our two-phase versus direct titration note sets out where the two methods diverge.
Packing, loading and MOQ in practice
Illustrative commercial terms are 25 kg kraft bags or fibre drums, palletised, with a one-tonne MOQ. Needle powder is dusty, so a bag filter at the feed hopper is worth planning for. A 20-foot container loads far less active surfactant when the grade is a 30% solution, since most of the weight is water. Our liquid versus powder freight comparison gives the arithmetic.
| Item | Illustrative term | What to confirm |
|---|---|---|
| Bag | 25 kg kraft, palletised | Net weight and liner |
| Drum | Fibre drum | Net weight per drum |
| MOQ | 1 tonne | Current minimum for the grade |
| Documents | TDS, lot COA, MSDS | Issued per shipment |
| Lead time | Confirmed per order | Production slot and vessel |
Where the total cost actually sits
Compare active matter delivered, not gross kilograms. Divide the quoted price by the assay fraction, then add freight, handling and any re-drying or dissolution step your plant needs. The worked example on cost per kilogram of active matter applies this to a powder and a liquid quote. Buyers in India, Pakistan, Iran, Russia and Southeast Asia often find the freight term changes the ranking.
Confirming terms before production
Once the sample passes, confirm the assay window, packing, labelling, document set and lead time in writing. SLS for sale and SLS powder pages show the current packing options. Contact our team with your port and monthly volume and we will confirm current MOQ, packing and lead time for the grade you selected.
Frequently asked questions
What is the minimum order quantity?
One tonne is our illustrative working MOQ for bulk grades. Confirm the current minimum for your grade and destination, since packing and consolidation can change it.
Can I get a sample before placing an order?
Yes. Request a sample from the specific grade you plan to buy, plus the TDS and a lot COA, so your QC method is validated against the right material.
Is a 30% solution cheaper to buy than powder?
Per kilogram of product, often yes. Per kilogram of active surfactant delivered, frequently no, because you ship roughly three tonnes of water per tonne of active.
Which documents come with a shipment?
A TDS, a lot-specific COA showing assay and pH, and the current MSDS. Packing photos and a retained sample can be discussed at the enquiry stage.
How long should I allow for a first order?
Allow time for sample validation, production slot and vessel booking. Request a quote with your port and monthly volume and we will confirm the current lead time.
Request a quote or a sample
To buy CAS 151-21-3 grades, request a quote with your target assay, monthly volume and destination port. Request a sample for QC validation and request the COA/MSDS before the first shipment.
Written and reviewed by the ORID Chem technical team. Last updated: 20 November 2026. Figures marked illustrative are working values, not quotations. Confirm current specifications on the product TDS and lot COA before ordering.



